AeroMap developed by the INO is a mapping that can be used for airborne dust and aerosol content of the full waveform laser radar technology. The technology is based on digital signal acquisition platform, with a compact system structure, relatively inexpensive advantage. AeroMap can dust and aerosols relative concentrations were detected in the air. It also contains a background camera to identify the source of dust and aerosols. To achieve the absolute concentration of dust and aerosols mapping, the sensor can be installed in the system in situ, providing calibration values. Benefits - the relative concentrations of aerosol measurement range up to 150 meters - measurement resolution of up to 20 cm (typically 75 cm) - typical detection limit value of 50 micrograms / cubic meter - do not hurt the eyes - including background camera help understanding of aerosol-generating procedures - including pitch, rotation unit, mapping speeds up to 20 ° / sec, can be kind real-time 2D and 3D mapping - Real-time display of aerosol concentration, can be used to trigger an alarm applications - Mining: carried dust mapping and monitoring and tracking dust clouds can be controlled ventilation as needed to optimize dust suppression technology - Bulk material handling: identifying dust generating process, the fence dust control, dust clouds mapping and tracking. - Construction, transportation industry: dust detection, road dust control and other technical parameters unpaved (1) laser light - laser diode wavelength: 905 nm - pulse energy: 3 μJ - Pulse Width: 20 ns - Maximum repetition rate: 25 KHz (as to ensure that does not hurt the eyes); up to 100 KHz - Average power: 75 mW (To ensure that does not hurt the eyes); up to 300 mW (2) acquisition part - the field of view (FOV): 12 mrad - Aperture: 50 mm (3) scans section - Operating range: 0 m to 7644 m - wave length: Maximum 6144 m - Resolution: 4.7 cm to 1.5 m (4) detecting section - Detector: SiAPD - analog / digital conversion: sampling Frequency 12 bits @ 100 MS / s - Value Average: 1-216 pulses - Dynamic range: 78 dB - Maximum frame rate: 20 Hz - Sensitivity: tens μg / m3; depending on the particle properties (5) scan head - Horizontal rotation angle: ± 180 ° - tilt angle: [- 31 °, + 83 °] - Scan speed: Maximum 25 ° / s (6) overall parameters (not including power transmission unit, tripod and wire) - Weight: 4.5 kg - Dimensions: 218 (width) x 208 (height) x 249 (depth) mm - Power requirements: 24 VDC @ 24 W, work in -20 to +40 degrees Celsius (7) Communication Interface GigE - Remote control via VNC Client (8) Software control and data analysis software can run on Win7 (requires a USB2.0 port, one serial port and one Ethernet interface to connect to the instrument) INO patented technology products, domestic users accept purchase orders or technology transfer cooperation .